Відео

@@jamesstuart137 your welcome, we are glad this was of help to you and we appreciate your support and feedback 😊 pls subscribe, share and like 👍

@@dRew-something Hi, sorry to hear this, maybe have a look at your brackets to see if they may need replacing or adjusting… you may have to try this multiple times 👍

@@zabzproject1416 thanks for your reply, whenever I move the bumper(bolts loosened) the brackets move too which I guess means they're not broken..tried to jack up the bumper to close the gap and then tightened the bolts but then when I lowered the jack the gap stays the same. I'm guessing I might need to take the front bumper off to get a better look

@@mikelovskizerkavoli2408 that’s exactly what I was thinking and saying to Abz, would that work fine ? Infront facing the rad, in between rad and headlights rather in between rad and engine?

@@Abdul-kv3sz JZK We really appreciate your comment and support 😇

@@jeffsgarage1969 your most welcome, we appreciate your support 😇

@@R8HAIDER thanks brother but we have too many projects, maybe write up details and price on the comments and see if anyone here would be interested? 👍🏼

@zabzproject1416 haha fair enough, brother. love the content man keep it coming. Removed from a 2003 BMW M3 62K Miles S54 Engine Complete Manual 6 Speed Gearbox Rear Diff

@@R8HAIDER thank you so much for the support. We appreciate it 😇

@@saidkhouna7042 To be honest were not mechanic and can’t give you a pin point kind of information. But doing quick search the Electric accelerate fail could be simple as cleaning the the Throttle body but please make sure you disconnect the battery before cleaning by the Throttle body. But would be the simple and cheap way of checking EAC and if that doesn’t cure it need to get it checked from a garage and see if they can find fault. Hopefully someone reads your message who might have been through the fault and could give more light to this. Hope the info was helpful.

@@zabzproject1416 thank you so much

@@johnnybravo7490 hahhahahahha 😂

@@DonOriginalEss unfortunately the wiper blade is the same size, the arm is smaller on the bluemotion… wiper blade was our first attempt 🤦🏽‍♂️

@@sumo1756 your welcome bud, pls like share & subscribe 😊

Have you tried cleaning or changing the idle control? What errors codes come up??

@@theCybershot123 Hi thanks for the tip, simple but awesome trick. Thank you for the feedback

@@MunuwarAli-im5ht hi yes you can, you’ll have to get a push start kit with chip/immobiliser online, preferably certified company 👍

Do you have any links to certified sites for this kit thanks zabz👍

@@weekendwarrior7080 😇

@@weekendwarrior7080 please like, subscribe & share 😇

@@fintangordon4995 hi, yes please make sure the battery is disconnected, apologies about not mentioning this in the video 🤦🏽‍♂️

@@zabzproject1416 How do you disconnect the battery?

@@ivanhoborka3493 Loosen 10mm bolt from positive and negative side and take terminals off so you have no power going to the electrics

Are you sure it’s an M8 socket? Another video showed an M10.

@@keorbats9429 Hi, we thought it was m10 but upon trying m10 it wouldn’t fit… so we tried m8 and that fitted perfectly as well as I believe the t55 socket… I would recommend trying m10 first as that should be the one that should work… my only guess would be that our bolts were replaced by the previous owners.. maybe 🤔

@@BrandonJay1983 FB market or eBay, you should find some 👍

@@aggisdemetri hi yes your right, it should hover around 9, try cleaning the throttle body.. If that don’t work then I would advice a service I.e. spark plugs & ht leads 👍

This is the quickest reply I’ve had anywhere online Instant!! Cheers for the info

@@aggisdemetri hahahah, your most welcome.. If you need any other help, just message us 👍

@@ashanudagedara-od4oj hi no as it was not an ecu issue, if you install the push start there’s no need to reprogram your key as the immobiliser was deactivated via key connection 👍 Unless you’re having a communication problem where the immobiliser is not reading the key then you will have to look more into this and possibly will need to reprogram the key etc..

@@zabzproject1416 When trying to start, the start motor spins a little and stops. A noise is heard near the solvonite switch

@@ashanudagedara-od4oj it sounds like your starter motor might be faulty, maybe have a look at that?

Hi not at all, they were good but you & other comments are 💯 right .. they don’t need to be over tightened 🤦🏽‍♂️ Mistake learnt for the future 😊

Thank you for the feedback, we are glad this video helped 😇

💯 looks that way in the video but in real they are the same… I think it’s the lighting plus fresh paint makes it look slightly different? Hope so 😳🫣

Thank you for the feedback, I’ve are glad this video helped 😇

Thank you for the feedback, these are one of our favourite cars but a nightmare to work on.. So much going on in the Z32’s it’s unbelievable 😍

Thank you 😊

That’s great to hear, this video was help to you 👍

Hi sorry just saw your message, that box comes with your push start button.. it’s part of the kit when you buy it from eBay 👍

​@@zabzproject1416 gooday bro i have diagram on my box , what wire bridge into the back fuse box? The blue wire in (in) how and the other blue wire in my box where can i connect? This is my diagram in my black box 2 blue wire 1 is (in) and 1 blue wire is (out) and black wire is (grnd) and red is (12v)

​@@zabzproject1416explain pls bro. My mirka standby 26days . Bcoz of that crank , battery is good and light on gauge. But no crank

​@@zabzproject1416check this bro. If got the right bridge. The 1 blue wire in my black box. is connect to back fuse box(red) then the other blue wire in my box together in black wire bridge into negative rigth and the last wire red is into postive? ij total of 4wires 2 blue and 1red 1black this is right?

Hi I wouldn’t recommend it, if that’s the only way you have just be extremely careful as the probe will give a temp 12v power and can instantly switch off by realising the button, where as the starter switch might have a slight different play depending on what switch you have 👍

@@zabzproject1416 Thanks for answering! It's a simple switch similar to Sealey VS 205, I would have posted a link but seems like I can't do that. But when you push the switch it closes the circuit and when you let go it cut the power. It's an intermittent problem, so I thought I'll splice the wire and pull it out of the box and when the car won't start I can connect the switch easily and start. That way I can use the car until I have found the problem. Is it too risky to do it that way or what do you think?

@@robe006 I think that may work but I would put a fuse in between the positive wire just to be in the safe side, good luck & please let us know how it goes 👍

@@zabzproject1416 That's a good idea! Thank you for the advice!

@@zabzproject1416 I connected it all today, I only tried starting once but seems to work fine. I connected a wire from the red one you show in the video and pulled it out through a small hole in the bottom of the box. Then I tested it with the starter switch, put some electrical tape around the wire and put it away under the hood until I will need it. I didn't put a fuse on the positivwe wire, but what amp fuse should I put?

Thank you for taking time out for the feedback, we really appreciate it 😇

Thank you for taking time out for the feedback, we really appreciate it 😇

Thanks we really appreciate your feedback, what would you recommend next for us? We have a lot of unfinished project such as; Silver Nissan Skyline r33 Silver Toyota Supra MK4 (X2) Black Toyota Supra MK4 Volkswagen Golf MK6 (which we are currently working on). We do have couple of Nissan Skyline R34 but they are kept for future projects.. Would love to hear from someone like yourself what’s more interesting on the channel 😇

it's the same only the sidelights are at the top and easier to reach than main beam.

@@gytosasI did it a different way by unscrewing the headlight 👍

Try removing the rear lights and see if you can remove the garnish then 👍

Hi yes it was our ECU that wasn’t grounded properly, hope you get yours sorted 👍

Hi it was aerosol can from Halfords Matt black 👍 What do you think of it ?

@@zabzproject1416 i'm not a big fan of matte black but matte hides all the imperfections, so looks good😁i wanna repaint my whole project car with yacht paint using roller and brush, so just looking for information if i should do it or better use aerosol cans🤣

@@mjevlampijevs we were looking into the roller paint on but never got around doing it, I would love to do or see a project done, let us know if you do go ahead with it 👍

That’s great to hear that this video was useful to you 👍

First time we have had an issue with this 190E in nearly sixteen years of ownership and over 180 000 miles on the clock. Had the good grace to play up at home too. New unit from MB on its way!

@@ronansill206 all the best, hope you get this sorted ASAP 👍